Establishing the link between ammonia emission control and measurements of reduced nitrogen concentrations and deposition

In the context of international efforts to reduce the impactsof atmospheric NH₃ and NH₄ ⁺ (collectively, NH_x), it is important to establish the link between NH₃emissions and monitoring of NH_x concentrations and deposition. This is equally relevant to situations where NH₃emissions changes are certain (e.g. due to changed source sectoractivity), as to cases where NH₃ abatement technologies havebeen implemented. Correct interpretation of adequate atmosphericmeasurements is essential, since monitoring data provide the onlymeans to evaluate trends in regional NH₃ emissions.These issues have been reviewed using available measurements and modelling from nine countries. In addition to historic datasets,the analysis here considers countries where NH₃ source sector activity changed (both increases and decreases) and countries where NH₃ abatement policies have been implemented.In The Netherlands an `ammonia gap' was identified between the expected reduction and results of monitoring, and was attributedinitially to ineffectiveness of the abatement measures. The analysis here for a range of countries shows that atmospheric interactions complicate the expected changes, particularly sinceSO₂ emissions have decreased at the same time, while at manysites the few years of available data show substantial inter-annual variation. It is concluded that networks need to beestablished that speciate between NH₃ and aerosol NH₄ ⁺, in addition to providing wet deposition, and sample at sufficient sites for robust regional estimates to be established. Such measurements will be essential to monitor compliance of the international agreements on NH₃ emission abatement.     

Influence of weight on the content of trace metals in tissues of Mytilus galloprovincialis (Lamarck, 1819): a forecast model

Fifty seven samples of Mytilus galloprovincialis (Lamarck, 1819) collected along the breakwater barriers of Fano (station 1) and Pesaro (station 2), Adriatic Sea, Marche Region, central Italy, were analyzed by atomic absorption spectrometry and Cd, Cu, Pb and Zn concentrations in the soft tissues were measured. The aims of this work were the statistical analysis of Cd-weight, Cu-weight, Pb-weight, Zn-weight relationships, and the building of a tendency function that allows assessing with a good approximation the concentrations of a metal in different weight organisms. In Mytilus galloprovincialis the content of Cd proportionally grew with the weight and therefore its concentration was independent from this factor; while the concentration of Pb decreased as the weight increased. In both cases the accuracy of multiple regression models improved considering the variable ‘site’, while the same approach appeared not reliable for Cu and Zn, that were two essential metals. Our results showed that a tendency function was reliable, solid and able to predict to a very satisfying extent the concentration of non-physiological metals, like Cd and Pb; while it did not show a good approximation with real Cu and Zn contents.     

Rhizosphere localized cationic peroxidase from barley roots is strongly activated by cadmium and correlated with root growth inhibition

The activity of Cd-induced POD isozyme isolated from the surface of intact barley roots growing under some abiotic stress conditions (toxic metals: Al, Co, Cu, Hg; drought, NaCl, extreme temperatures: heat, cold) and compounds activating (2,4-D) or inhibiting (SHAM) POD activity as well as H(2)O(2) and H(2)O(2) scavenger (DTT) was characterized. Strong Cd concentration-dependent accumulation of one cationic POD isozyme was observed on PAGE, which correlated with Cd- and other stress induced root growth inhibition. This isoPOD is basic with isoelectric point about 9 and its localization is restricted only to the apical part of the barley root tip.     

Air concentrations of PCDD/Fs, PCBs and PCNs using active and passive air samplers

The concentrations of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) were determined in air samples collected at four sampling sites located in two zones of Barcelona (Spain): near a municipal solid waste incinerator (MSWI) and a combined cycle power plant (3 sites), and at a background/control site. Samples were collected using high-volume active samplers. Moreover, 4 PUF passive samplers were deployed at the same sampling points during three months. For PCDD/Fs, total WHO-TEQ values were 27.3 and 10.9 fg WHO-TEQm(-3) at the urban/industrial and the background sites, respectively. The sum of 7 PCB congeners and the Sigma PCN levels were also higher at the industrial site than at the background site. In order to compare active and passive sampling, the accumulated amounts of PCDD/Fs, PCBs and PCNs in the four passive air samplers, as well as the total toxic equivalents in each sampling site were also determined. To assess the use of PUF passive samplers as a complementary tool for PCDD/F, PCB and PCN monitoring, sampling rates were calculated in accordance with the theory of passive air samplers. PUF disks allowed establishing differences among zones for the POP levels, showing that they can be a suitable method to determine POP concentrations in air in areas with various potential emission sources. Although both particle and gas phase were sorbed by the PUFs, data of gas phase congeners are more reproducible.     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Transport of brine shrimps via the digestive system of migratory waders: dispersal probabilities depend on diet and season

Waterbirds are known to disperse invertebrate propagules that survive gut passage, but there is very little information about how the probability of dispersal changes at different times of the annual cycle when birds move in different directions, or how it is affected by changes in diet. We studied internal transport of brine shrimp Artemia cysts by migratory waders in the Odiel saltworks in south-west Spain. Viable cysts of parthenogenetic Artemia were abundant in the faeces and regurgitated pellets of redshank Tringa totanus, pellets of spotted redshank T. erythropus, and faeces of black-tailed godwit Limosa limosa during spring and/or autumn migrations in 2001–2002, but were not recorded during winter. Godwits did not produce pellets, and spotted redshank faeces were not sampled. Significant correlations between the number of cysts in a pellet or faecal sample and the proportion of that sample constituted by Artemia adults suggested that most cysts were ingested while in the ovisacs of gravid females. The proportion of cysts destroyed during digestion increased when accompanied by harder food items or grit, and when fewer cysts were ingested. The median number of intact cysts was higher in redshank faeces than in their pellets, but cysts extracted from pellets were more likely to hatch. A higher proportion of redshank pellets contained Artemia cysts in spring than in autumn, but more redshank migrated through the area in autumn. Significantly fewer cysts were recorded in redshank pellets in winter than in spring or autumn. Our results confirm that there is potential for long-distance dispersal of Artemia cysts via waders during both northwards (spring) and southwards (autumn) migrations.     

Sketching sustainable land use in Europe by 2040: a multi-stakeholder participatory approach to elicit cross-sectoral visions

The continuously growing global demands on a finite land resource will require better strategic policies and management of trade-offs to avoid conflicts between different land-use sectors. Visions of the future can support strategic planning by stimulating dialogue, building a consensus on shared priorities and providing long-term targets. We present a novel approach to elicit stakeholder visions of future desired land use, which was applied with a broad range of experts to develop cross-sectoral visions in Europe. The approach is based on (i) combination of software tools and facilitation techniques to stimulate engagement and creativity; (ii) methodical selection of stakeholders; (iii) use of land attributes to deconstruct the multifaceted sectoral visions into land-use changes that can be clustered into few cross-sectoral visions, and (iv) a rigorous iterative process. Three cross-sectoral visions of sustainable land use in Europe in 2040 emerged from applying the approach in participatory workshops involving experts in nature conservation, recreation, agriculture, forestry, settlements, energy, and water. The three visions—Best Land in Europe, Regional Connected and Local Multifunctional—shared a wish to achieve a land use that is sustainable through multifunctionality, resource use efficiency, controlled urban growth, rural renewal and widespread nature. However, they differ on the scale at which land services are provided—EU-wide, regional or local—reflecting the land-sparing versus land-sharing debate. We discuss the usefulness of the approach, as well as the challenges posed and solutions offered by the visions to support strategic land-use planning.

     

Health risk assessment of emissions of dioxins and furans from a municipal waste incinerator: comparison with other emission sources

The aim of this study was to calculate the incremental lifetime-risk to dioxins and furans (PCDD/Fs) for the population living in the surroundings of a municipal solid waste incinerator (MSWI), as well as to establish the potential reduction on human health risks as a consequence of the adaptation to the EU legislation on pollutant emissions from the MSWI stack. Analytical and modelled results were obtained. PCDD/F concentrations in environmental media were determined by means of a simple-compartment-multimedia model (air-soil-vegetation model). Predicted and measured PCDD/F concentrations in soils and vegetation were compared, and the effects of MSWI emissions in the environmental media were determined. Human health risks due to PCDD/F emissions from the MSWI were also estimated based on I-TEQ measured and modelled in various environmental media. Cancer risks due to PCDD/F emissions of the plant were 1.07E-07 and 3.08E-09, before and after installation of the clean air system, respectively. On the other hand, cancer risks due to other PCDD/F emission sources in the area were 5.54E-06 and 1.86E-06. Total PCDD/F cancer risks (including those from diet) for the population living in the vicinity of the MSWI were 1.3E-04 and 4.25E-05, respectively (67.6% of reduction). Hazard ratio for total PCDD/F exposure (including diet) decreased during the last 5 years from 1.16 to 0.38. The above data show that other emission sources of PCDD/Fs also have a notable environmental impact on the area under direct influence of the MSWI.     

Assessment of application-rate dependent effects of a long-term fire retardant chemical (Fire Trol 934) on Typha domingensis germination

Although long-term fire retardants (LTR) gain increasingly acceptance as effective tools for wildfire management, recent studies indicate their potential harmfulness in the environment, especially in aquatic ecosystems. This study comprises a first laboratory impact assessment of LTR action in temporal Mediterranean wetlands, using seed germination of Typha domingensis as indicator of impact. Our aim was to identify application rates upon which seed germination could be significantly affected. We tested for low (1 l m(-2)) and high (3 l m(-2)) application rates of Fire Trol 934 which are recommended by the manufacturers as a function of fuel characteristics. In addition, we simulated the impact of a higher application rate of 5 l m(-2) because inhomogeneous dispersal of the LTR during fire control and prevention operations can result in locally elevated applications. Results of a microcosm experiment indicate that application rates of 1 or 3 l m(-2) can impact Typha germination rates in the short-term via indirect LTR-mediated effects on water quality, which suppressed necessary cues for germination. However, a subsequent experiment with Petri dishes, using seeds isolated from the LTR treated sediments did not show significantly different germination rates between the control and the treatments with application rates of 1 or 3 l m(-2). This suggests that retardant pre-application germination success could be recovered in nature once the retardant is eliminated. By contrast, seeds almost completely failed to germinate in the microcosm experiment and the subsequent Petri dish essay when an application rate of 5 l m(-2) was used. This suggests a critical level upon which Typha seed germination may be perpetually limited. Research should be extended to other plant species to provide fire managers with guidelines for environmentally safe use of LTR in the Mediterranean region.     

Dispersing Bacterial Cellulose Nanowhiskers in Polylactides via Electrohydrodynamic Processing

In the present study, hybrid electrospun polylactide (PLA) fibers reinforced with highly dispersed crystalline bacterial cellulose nanowhiskers (BCNW) in solution concentrations up to 15 wt% were developed and characterized. The overall aim was to encapsulate dispersed BCNW in fibers to be later re-dispersed in virgin PLA by melt compounding. Initially, the suitability of three different solvents [1,1,1,3,3,3-hexafluoro-2-propanol (HFP), acetone–chloroform and chloroform/polyethylene glycol (PEG)] for fiber production was evaluated and solutions containing 5 wt% BCNW were used to generate electrospun hybrid PLA fibers. These fibers presented a homogeneous morphology, as assessed by scanning electron microscopy, and transmission electron microscopy images demonstrated that BCNW were well distributed along the fibers. Differential scanning calorimetry analyses showed that the incorporation of PEG into the fibers resulted in a T_g drop due to a plasticization effect and decreased thermal stability as a result of low interactions between the matrix and the BCNW. Subsequently, fibers were produced from the selected solutions (HFP and acetone–chloroform) containing up to 15 wt% BCNW. As a result of the great increase in the viscosity of the solutions, lower solids contents were required, leading to a better dispersion and incorporation degree of BCNW within the fibers. HFP was found to be a more suitable solvent, since higher incorporation levels were estimated by X-ray diffraction and improved matrix–filler interactions were suggested by a slight increase in the T_g of the fibers.